Mileage
26,092
Service Date
10/19/2022
Services Performed
- FAULT TRACE SYSTEM: ______ CODES RETRIEVED: U1001 CAN COMM CIRCUIT P0826 UP/DOWN SHIFT SWITCH B2099 IGN KEY RELAY OFF CIRCUIT P1722 VEHICLE SPEED SIGNAL P1701 TCM B26F2 IGN RELAY ON B26F6 BCM B2099 IGN RELAY OFF CIRCUIT B2098 IGN RELAY ON CIRCUIT CHECKED ALL FUSES IN CAR, FOUND NO FUSES BLOWN OR MISSING. CHECKED HIGH AND LOW CAN BUS SIGNAL HIGH CAN AT 2.7VDC SWITCHING NORMALLY. LOW CAN AT 2.3 VDC SWITCHING NORMALLY. DISCONNECTED BATTERY CHECKED CONTINUITY BETWEEN PIN 6 AND 14 ON DLC FOUND NORMAL READING OF 61 OHMS. RECOMMEND ADVANCED DIAG.
- GAINED ACCESS TO BCM. LOAD TEST POWERS AND GROUNDS TO BCM. ALSO LOAD TESTED POWER AND GROUNDS AT IPDM, ALL CHECKED GOOD. TESTED SIGNAL FROM IGNITION SWITCH TO BCM DROPS FROM BATTERY VOLTAGE TO GROUND WHEN SWITCH IS PRESSED. FOUND PIN 98 IPDM RELAY CONTROL IS FUNCTIONING. WHEN START BUTTON IS PRESSED VOLTAGE DROPS TO 5VDC IPC COMES BACK ON AND VOLTAGE DROPS TO .6 VDC. THIS VOLTAGE SHOULD DROP TO 0 VDC AND STAY. RECOMMEND: BODY CONTROL MODULE (TO START, COULD HAVE DAMAGED IPDM)
- REPLACED BODY CONTROL MODULE
- PROGRAMMED BODY CONTROL MODULE
- PROGRAMMED KEYS
- PROGRAMMED TPMS SENSORS
- REPROGRAMMED BODY CONTROL MODULE AFTER REPLACING IPDM
- REPLACED IPDM
Lani C. gave our service a 5 star review on 10/26/2022