2007 Honda CR-V
Mileage
155,297
Service Date
8/28/2020
Services Performed
- Change oil and oil filter. Check air filter and breather filter. Top off all fluid levels and set tire pressures. Preform basic Vehicle inspection OIL LEVEL WHEN CAR CAME IN _____2 qts low________
- DOES THE A/C BLOW WARM OR COLD _______WARM_______ PREFORMED A/C SYSTEN EVAC, Record the amount of Freon before___0_____and after A/c service___48KG_____ VENT TEMPERATURE:Before __80____After___48___ LOW PRESSURE READINGS: Before ___0___After___135___ HIGH PRESSURE READINGS: Before ___0___After___35___ Found MG Clutch fuse blown
- Once cylinder head has been removed, will do a deck check on the engine block, and measure warpage on cylinder head. If everything appears to be fine, will send cylinder head to machine shop for resurface. Upon disassembly or reassembly, we may find other things that may need to be addressed at that time.
- Replaced air filter
- Replaced cooling fan assembly and motor
- Replaced Drive Belt
- Replaced Head gasket with all components.
- Replaced high pressure power steering line
- Replaced water pump, filled and bled cooling system. Cooling fans operate properly at this time. No overheating of engine at this time. Everything is operating as designed at this time.
- Scanned vehicle and received codes: P0117, 11-1, 13-1, 15-1, 17-1, 31-1, 33-1, 37-1, 16-1, 18-1, 83-1, e7-11, 83-25, 31-10, 81-43, B1177. Filled cooling system, cooling system was low 1 gallon of coolant. Performed bi-direcional testing on cooling fans. Fans do not operate at any speed. Tested signal, power, and ground. Receiving proper signal, power and ground to cooling fan motors. Bled cooling system and performed block test on cooling system on 5 gas analyzer. Vehicle failed the block test at 66HC.
- CYLINDER HEAD MEASURE AND RESURFACE
CHRISTOPHER W. gave our service a 5 star review on 9/4/2020
