Chrysler Archives - Lael's International Auto Services

2007 Chrysler 300
Mileage
230,000
Service Date
1/14/2025
Services Performed
The only way to properly repair this is dash replacement due to the plastic falling apart. Created new bracket to hold ignition assembly. Operates properly at this time.
Michael G. gave our service a 5 star review on 1/14/2025
2012 Chrysler 200
Mileage
135,872
Service Date
12/28/2024
Services Performed
Confirmed customer concern. Vehicle has been driven 840 miles since last visit. Scanned vehicle Received code: P0441 EVAP system incorrect purge flow. Using bii-directional testing with the scan tool, activated the purge valve. No response from valve. due to location of purge valve to perform final test of valve, the Powertrain Control Module needs to be removed to access the purge valve to remove to bench test valve. Recommend purge valve and replace if fails bench test.
Performed bench test on purge valve. Valve failed testing. Installed new factory purge valve onto vehicle. Cleared codes. Performed in bay service test. Service test passed at this time. Test drove vehicle. No problems at this time.
LYNN Z. gave our service a 5 star review on 12/30/2024
2012 Chrysler 200
Mileage
135,032
Service Date
11/26/2024
Services Performed
FAULT TRACE SYSTEM: __MAXIMUS____ CODES RETRIEVED: P0520 AND P0571, ENGINE OIL PRESSURE AND BRAKE SWITCH 1 PERFORMANCE. CHECKED OIL PRESSURE FAULT FIRST, FOUND OIL PRESSURE SWITCH READING FALSE AND NO DATA AVAILABLE. UPON INSPECTION OF LOCATION OF OIL PRESSURE SWITCH, FOUND ENGINE VALLEY FULL OF ENGINE OIL, INDICATING A LEAKING ENGINE OIL COOLER. RECOMMEND TO REPLACE COMPLETE OIL COOLER ASSEMBLY(FACTORY) WITH A NEW OIL PRESSURE SWITCH, CLEANING OIL OFF ENGINE VALLEY, AND RE-EVALUATING FAULT CODE. FOR BRAKE SWITCH CIRCUIT 1, CHECKED ACTUAL VALUES, FOUND SWITCH WORKING CORRECTLY AT THIS TIME AND FAULT AS HISTORY. SINCE PROBLEM INTERMITTENT SHOP OWNER RECOMMENDED TO CHANGE STOP LAMP SWITCH TO A FACTORY SWITCH(RECENTLY REPLACED WITH AFTERMARKET SWITCH) TO START FIRST. FURTHER DIAGNOSIS MAYBE REQUIRED FOR POSSIBLE CORRODED OR LOOSE CONTACTS IN MULTIPLE ELECTRICAL CONNECTORS.
DISCONNECT AND CONNECT(D&C) BATTERY GROUND CABLE, DRAIN AND FILL ENGINE COOLANT FOR REPAIRS, REMOVED AND RE-INSTALL(R&I) INTAKE MANIFOLD ASSEMBLY-UPPER AND LOWER SECTION, REPLACED ENGINE OIL COOLER AND HEATER HOSE TO COOLER. WASH ENGINE VALLEY AFTER REPAIRS. AFTER OIL CHANGE, ERASED CODES AND ROAD TEST VEHICLE, FOUND ENGINE OPERATING AS DESIGNED AT THIS TIME.
(Combination) – ENGINE OIL COOLER HOSE – Remove & Replace V6
WASH COMPLETE ENGINE TOP AND ENGINE VALLEY AREA AS BEST POSSIBLE TO REMOVE EXCESS OIL AND COOLANT FROM ENGINE VALLEY.
Change oil and oil filter. Check air filter and breather filter. Top off all fluid levels and set tire pressures. Preform basic Vehicle inspection OIL LEVEL WHEN CAR CAME IN _______FULL____________
DURING REMOVAL OF INTAKE MANIFOLD REPLACED SPARK PLUGS.
REPLACED STOP LAMP SWITCH AND ADJUST AS NEEDED.
LYNN Z. gave our service a 5 star review on 12/5/2024
2012 Chrysler 200
Mileage
133,961
Service Date
11/1/2024
Services Performed
PERFORMED SMOG CHECK BASELINE, FAILED DUE TO MONITORS NOT READY. SEE LINE BELOW FOR REPAIRS.
CHECKED ACTUAL VALUES AFTER BASELINE SMOG CHECK, FOUND OXYGEN SENSORS OPERATING IN RANGE. PERFORMED RANGE TEST OF OXYGEN SENSORS, FOUND UPSTREAM OXYGEN SENSORS OPERATING IN PROPER RANG, BUT BOTH DOWNSTREAM OXYGEN SENSORS READING ON HIGHER SIDE OF RANGE. CHECKED MODE 6 IN GENERIC OBD, FOUND BOTH DOWNSTREAM OXYGEN SENSORS AT MAX VALUES. RECOMMEND TO REPLACE BOTH DOWNSTREAM OXYGEN SENSORS, RESET ADAPTATION VALUES AND SETTING OF MONITORS TO RE-EVALUATE READINGS AFTER REPAIRS.
AFTER ALL REPAIRS, ROAD TEST VEHICLE MULTIPLE TIMES TO SET ALL MONITORS AND AFTER SET, PERFORM FINAL SMOG CHECK.
REPLACED DOWNSTREAM LEFT BANK(FRONT SIDE BY RADIATOR) O2 SENSOR.
REPLACED RIGHT SIDE ENGINE(BY FIREWALL) DOWNSTREAM O2 SENSOR. RESET ADAPTATION VALUES AND ROAD TEST TO SET O2 SENSOR MONITORS.
DURING ROAD TEST, FOUND ANTI SLIP WARNING CAME ON IN CLUSTER, FOLLOWED BY CHECK ENGINE LIGHT. DURING SCANNING OF FAULTS, FOUND FAULT CODE FOR P0572 PERMANENT CODE FOR BRAKE LAMP SWITCH STUCK ON. TEST ACTUAL VALUES OF STOP LAMP SWITCH, FOUND 1 SWITCH STUCK ON, WOULD NOT SWITCH OFF/ON AS SWITCH #2. DETERMINED INTERNAL FAULT WITH STOP LAMP SWITCH. REPLACED STOP LAMP SWITCH AND ERASED CODES.
PERFORM FINAL SMOG CHECK AFTER REPAIRS. FOUND PASS TEST. CERT# UE382266C. FROM EMISSION LABEL UNDER HOOD; CCRXJ03.6VPA, EQUIPPED WITH TWC, HO2S, SFI.
LYNN Z. gave our service a 5 star review on 11/1/2024
2014 Chrysler Town & Country
Mileage
21,635
Service Date
7/26/2024
Services Performed
FAULT TRACE SYSTEM: ______ CODES RETRIEVED: P0456 SMALL EVAP LEAK. CHECKED PURGE VALVE, AND SMOKE TESTED SYSTEM. PURGE VALVE IS FUNCTIONING PROPERLY AND SMOKE TEST SHOWED .008 INCHES OF LEAKAGE. ( MAX IS 10 INCHES). RECOMMEND EVAPORATIVE SYSTEM INTEGRITY MODULE.
EVAPORATION CONTROL CANISTER – Remove & Replace
MYRNA B. gave our service a 5 star review on 7/28/2024
2016 Chrysler 200
Mileage
79,666
Service Date
6/27/2023
Services Performed
Road test vehicle. Check all suspension and steering parts for wear. Check tire pressure and condition. Check riding height. Check caster and camber angles and adjust as required. Check and set toe-in as required. Center steering wheel.
ZACK R. gave our service a 5 star review on 6/29/2023
2005 Chrysler Town & Country
Mileage
95,221
Service Date
6/2/2023
Services Performed
40 POINT AAA INSPECTION
GARY W. gave our service a 5 star review on 6/2/2023
2007 Chrysler Town & Country
Mileage
235,740
Service Date
3/7/2023
Services Performed
Change oil and oil filter. Check air filter and breather filter. Top off all fluid levels and set tire pressures. Preform basic Vehicle inspection OIL LEVEL WHEN CAR CAME IN ______OK_____________
SEE REPORT.. NEEDS ALIMENT , PULLS TO RIGHT
AXLE SHAFT ASSEMBLY – Remove & Install or Remove & Replace – One Side – [NOTE: For Independent Suspension Type Axles, Axle Shaft Assembly consists of Axle Shaft, Boots and Joints.]
FLUSH POWER STEERING SYSTEM FLUID DIRTY
EXCESSIVE CARBON BUILD UP
REPLACE TRANSMISSION FILTER AND ADD NEW FLUID
REPLACE AIR FILTER DIRTY
COOLANT EXCHANGE AND SYSTEM INSPECTION
REPLACE BRAKE FLUID
Road test vehicle. Check all suspension and steering parts for wear. Check tire pressure and condition. Check riding height. Check caster and camber angles and adjust as required. Check and set toe-in as required. Center steering wheel. TIRES SHOWING ABNORMAL WEAR?
Nayan P. gave our service a 5 star review on 3/7/2023
2009 Chrysler Town & Country
Mileage
66,601
Service Date
12/28/2021
Services Performed
CONFIRMED COOLANT LEAK FROM HEATER HOSE TEE.
REPLACED BOTH HEATER HOSES W/TEES. PRESSURE CHECK, BLOCK CHECKED AND CONFIRMED ELECTRIC FAN OPERATION. ALL CHECKED GOOD.
JIM N. gave our service a 5 star review on 1/2/2022
2005 Chrysler Town & Country
Mileage
95,513
Service Date
10/19/2021
Services Performed
Removed and replaced rear brakes and rotors clean and lubed slides new brake pads adjusted parking brake. Front brakes are almost like new
Change oil and oil filter. Check air filter and breather filter. Top off all fluid levels and set tire pressures. Preform basic Vehicle inspection OIL LEVEL WHEN CAR CAME IN __about a quart low. Performed oil change topped off of fluids _________________
GARY W. gave our service a 5 star review on 10/22/2021

Chrysler

We Service and Repair all Chrysler cars