2012 Chrysler 200
Mileage
135,032
Service Date
11/26/2024
Services Performed
- FAULT TRACE SYSTEM: __MAXIMUS____ CODES RETRIEVED: P0520 AND P0571, ENGINE OIL PRESSURE AND BRAKE SWITCH 1 PERFORMANCE. CHECKED OIL PRESSURE FAULT FIRST, FOUND OIL PRESSURE SWITCH READING FALSE AND NO DATA AVAILABLE. UPON INSPECTION OF LOCATION OF OIL PRESSURE SWITCH, FOUND ENGINE VALLEY FULL OF ENGINE OIL, INDICATING A LEAKING ENGINE OIL COOLER. RECOMMEND TO REPLACE COMPLETE OIL COOLER ASSEMBLY(FACTORY) WITH A NEW OIL PRESSURE SWITCH, CLEANING OIL OFF ENGINE VALLEY, AND RE-EVALUATING FAULT CODE. FOR BRAKE SWITCH CIRCUIT 1, CHECKED ACTUAL VALUES, FOUND SWITCH WORKING CORRECTLY AT THIS TIME AND FAULT AS HISTORY. SINCE PROBLEM INTERMITTENT SHOP OWNER RECOMMENDED TO CHANGE STOP LAMP SWITCH TO A FACTORY SWITCH(RECENTLY REPLACED WITH AFTERMARKET SWITCH) TO START FIRST. FURTHER DIAGNOSIS MAYBE REQUIRED FOR POSSIBLE CORRODED OR LOOSE CONTACTS IN MULTIPLE ELECTRICAL CONNECTORS.
- DISCONNECT AND CONNECT(D&C) BATTERY GROUND CABLE, DRAIN AND FILL ENGINE COOLANT FOR REPAIRS, REMOVED AND RE-INSTALL(R&I) INTAKE MANIFOLD ASSEMBLY-UPPER AND LOWER SECTION, REPLACED ENGINE OIL COOLER AND HEATER HOSE TO COOLER. WASH ENGINE VALLEY AFTER REPAIRS. AFTER OIL CHANGE, ERASED CODES AND ROAD TEST VEHICLE, FOUND ENGINE OPERATING AS DESIGNED AT THIS TIME.
- (Combination) – ENGINE OIL COOLER HOSE – Remove & Replace V6
- WASH COMPLETE ENGINE TOP AND ENGINE VALLEY AREA AS BEST POSSIBLE TO REMOVE EXCESS OIL AND COOLANT FROM ENGINE VALLEY.
- Change oil and oil filter. Check air filter and breather filter. Top off all fluid levels and set tire pressures. Preform basic Vehicle inspection OIL LEVEL WHEN CAR CAME IN _______FULL____________
- DURING REMOVAL OF INTAKE MANIFOLD REPLACED SPARK PLUGS.
- REPLACED STOP LAMP SWITCH AND ADJUST AS NEEDED.
LYNN Z. gave our service a 5 star review on 12/5/2024
